All about product
Tool for emergency opening of Italian locks ISEO R50 / ISEO R11.
It is recommended to use cut foil with a thickness of 0.05 mm.
Additionally, self-adhesive foil with a thickness of 0.05 mm is glued on the top.
Text in the 1st video: Self-adhesive foil is glued to the top layer. I will make a separate video on how to glue it correctly, so as not to waste time now. Two handles are included. The main, standard one. Long, it just needs to be at hand, in case it jams or something else. And so we work with a regular handle. The foil is already glued to the top, so as not to glue it for a long time. We work with a regular 0.5. We put it on the back part and then transfer it to the working part. We insert it carefully, shaking it a little, so that the foil does not wrinkle on both sides. Like this, shaking it, it should go in by itself. Do not push it forward strongly. We pull it to the left and up and down. You can then combine it with such presses. I will immediately show you why you need a handle. It should be the second one at hand. Let's say it can easily rotate in one direction, but jam in the other. Then you will need to put on this handle to turn it with a sharp movement. Or your hand is simply tired, it is difficult to press with this handle. It's just easier to work, the hand gets tired less. In this position or in the middle position. Then it will be convenient to shake up and down. We make a tension to the left. Let's say it rotates easily to the right, but jams to the left. Therefore, it is necessary to make a sharp movement. Not by force, but sharp. The main handle is small. Strip. We make a shape. Carefully insert, slightly shaking. They open very well. Two R11, two R50. I will make a separate video on how to properly glue self-adhesive foil. The price will be on the website, phone numbers, links. Everything will be on the video. Bye.
Text in the 2nd video: Gluing foil, namely the top row of self-adhesive on R50, R11. Now I will show you how to do it better. Take the self-adhesive, cut strips. The width here is 4 millimeters. About 3-4. Such strips, you can even thinner. 3 millimeters, like this. Then here is the edge, the upper edge, on which the foil shape is made, the upper one. Here is this strip, we put it on top of it, on the edge. That is, in fact, everything is as usual, so we put this strip now. The usual one, when we make a shape, we put it first and make a shape. We make a shape in the same way, only from self-adhesive. We folded the nose and you can use a ruler, smooth it well. It tore a little. Now again. We put it on the edge, fold the nose. You can do this with a card, a credit card. You can just use your nails. Here is the shape. We take it off, here is the form. Then carefully peel off this very sticker from the back, peel off the paper. It is sticky and now we glue it here. Only not in the middle, not here in the middle. Slight shift to the edge, a little to the edge, here, to the left. We take it from the nose, here it is stuck, we gently bend this edge. What is the point? We glued it and here the edge remains sticking out, here it is, the edge sticks out, because the pin rises higher. Accordingly, the edge was sticking out on our foil. You can smooth it out a little and when we insert it into the lock, there is a slight groove at the top, like this gently, slightly shaking, do not push, but so that it goes in. The edge sticks out, as you can see. This is how it is glued. Then, as usual, we made this form again, transferred it to the working part and insert it like this. I think it's clear here. Just like regular foil, it's placed on the edge, a shape is made and then glued so that this edge remains. That's all, basically. We can open it now. Two layers. That is, we make both the upper and lower foil on the same edge. We give it a shape. We move this one here. We insert it like this, shaking it slightly, gently shaking it so that it goes in normally. And mainly to the left. Tension to the left and up and down to the left. And you can also right and left. If it jams, you can use this handle. That's all. That's how foil is glued to R-50 and R-11.
