All about product
Tool for emergency opening of ISEO locks | R500 SPI (country of manufacture of the lock - Italy).
It is recommended to glue self-adhesive foil with a thickness of 0.05 mm on the top of the key and ready-made foil with a thickness of 0.06 mm on the main row of pins
Text in the video: ISEO R-500. The tool for it, is the tool with foil, but a force one. Because there are interactive pins and we'll have to break them a little. And, since the pins in the cylinder are thin, that is, this also allows us to break them a little. R-500. Side pins. We use foil for the main row. Ready-made gold foil 0.06 mm. Top - this is self-adhesive foil. Self-adhesive must be glued like this, and it`s 05 thickness. Then we make a form. We put it on the edge as usual. We bend the nose. You can go over it with a plastic card. And you can use WD if you wish or some similar product. We transfer it to the working part and insert it so that the foil does not wrinkle. When we insert the tool, we must look from below to make sure that it goes in evenly and does not wrinkle. In case it wrinkles, in order to see this and redo the foil. Carefully, shaking. Necessarily to the stop and gradually at first, then more and more. Our handle is a powerfull one. Since we will give a load. Gradually, slowly at first. Gradually we will increase the load. You can try to swing up and down. Let's make tension and stat to swing. Now when such a click happened, it's time to add a little more force. It happens when it hits the false one.Sometimes it will turn out like this. It's a little long and the lock, it is already clear that it will not work. Sometimes it will turn out easier. It will depend on the pattern on the key. But the swinging must be done gradually, gradually and smoothly reach the maximum force. The lock, of course, after this it is unlikely to be workable. You can, of course, try to turn the key with great effort. That is, this is exactly such an Emergency opening method.
