All about product
Self-impression master key ISEO R700
It is recommended to use cut foil with a thickness of 0.05 mm or 0.06 mm.
Additionally, self-adhesive foil with a thickness of 0.05 mm is glued to the top.
Text in the video: Hello, Iseo, this is the R700 series. It looks a lot like R6, it looks like R7, the R700 series. Well, if you take two locks, here is the R7 on the right and here is the R700 on the left. They look almost identical, very similar. But here is the attachment, which is ISEO R6, R7, it does not fit. Although they are very similar, it does not fit. R6, R7 does not fit here. R700 has its own profile. Three-row, up-down, side pins. So, how do we work? We use foil 05-06, yellow and white are suitable. Most often white, 05th. This is the main one. And on top we use 05th self-adhesive. 05th self-adhesive, a strip of 3 millimeters, 3-4 millimeters such a strip. We just stick it on top. Here we take the tool, glue it like this, and stretch it, give it a stretch, and tear off the excess like this. Here you can smooth it conveniently with any credit card. And smooth it on top, and here. That is, the top row is glued, self-adhesive 05. And the bottom one, a regular strip, we also make a shape. We can swing it like this, and mainly to the left, we stretch it to the left, and up and down. Because to the right it does not give play. If it jams, you can do a sharp jerk, or in this case a long handle is convenient. It is simply easy to jerk and tear off with a long handle. In this case, a short one cuts a little on the fingers. And it is very easy with a long one. Well, in general, the meaning is clear.
