All about product
A master key for opening FUARO locks (row 2).
It is recommended to use 0.07 mm thick foil.
Text in the video: This is a Fuaro double-row lock. This is what the cylinder looks like. It's similar to... there's a similar one, I'll remember which one now. Mortira has a similar one, but the Mortira tool doesn't fit here. That is, for Fuaro, only a specific tool is needed for Fuaro. Foil—well, you can use different foils, but I tried it this way; 0.07 mm seems to fit perfectly here, so we'll use 0.07 mm foil sheets. Cut a strip, approximately half the key or slightly wider than half the key. On the back, as usual, make a shape. Here, push it slightly to the side, like so, so it overlaps, and make a shape. You can trim off the excess and fold it over to the side, like this. That's basically it, the foil is ready, transfer it to the working part. You can move it left and right, or, as usual, it's usually pulled left and up and down. This worked literally on the first try. Accordingly, it opened very quickly, meaning 0.08 foil will also work. I think 0.07 is optimal. 0.07-0.08, if the foil isn't too wrinkled, you can put it back on the mold, re-do it, and continue working. That's also possible. Now let's take the second lock. The best option is to tighten it to the left, and pump it up and down. Basically, these are the Fuaro double-row locks.
