All about product
Lockpicking & Sperrwerkzeuge für Schlüsseldienste
Impressioning locksmith picks for residential cylinders
CISA/AP3/AP4/ABUS/XP20/XP2/BRICARD DUAL XP
For most locks, it is recommended to use 0.08 mm sheet foil or 0.07 mm.
Tool comes with foil and all neccessary.
Text in the first video: Hi! CISA AP-3, AP-4. The blue key is Bricard, essentially a copy. The tool is the same for all of them. The main foil we work with is cut 0.06 mm gold foil. Less frequently, we use 0.08 sheet foil. This applies if 0.06 doesn't open. Let's say these all work well with 0.06, but the AP-3 works better with 0.08. But first, always start with 0.06. Now let's try to open all of this. A strip of foil is essential... be sure to make a mold on the back of the tool. So that it completely takes the shape of the key. Here are all these corners, the nose, and this one on the side. The tool usually fits tightly, so it's important that the foil doesn't stick out anywhere. Now we transfer it to the working part and also adjust the nose. Just be careful not to distort the height. Work both left and right, and up and down. That is, pull to the left frequently and then up and down. We take the next one - CISA AP-4S. Same thing. We definitely need to make a mold. Another CISA AP-4S. And then a CISA AP-3. Here, even by touch, when the key is inserted, you can feel the springs are stronger. Accordingly, they press harder on the foil. Well, let's try it. Let's try 0.06. If 0.06 doesn't work, then we'll use 0.08. There's not much choice in foil here. It's either 0.06, if not, then 0.08. I don't see the point in trying anything else here. If 0.06 doesn't work, then we'll use 0.08. If 0.08 doesn't work, then it's not meant to be. It clicked, the foil has already been pinched. Now 0.08. We cut out a thin strip. And everything is the same. Be sure to shape it, shape it very well. Even 0.08 sometimes gets too tight. Let's try again. Just to be clear, it doesn't open 100% of the time. But I think it's 90%. Out of 10 locks, 9 or 8 usually open. The high pin is jamming here. Okay, let's not waste much time. It opened before, but now it doesn't want to open a few times. That's how it happens. The tool is compatible with all these locks: AP-3, AP-4, Bricard. There's also an ABUS, exactly the same. All of this is compatible with one key. The price will be on the website. Phone numbers, links, everything will be in the video.
Text in the 2nd video: This is Cisa Ap 3/Ap 4. Again I will show you how to use the tool and how to glue foil. Here I have 4 locks: two Ap3 and two Ap4. Now let's open them all. You can use almost any foil. Previously, I used 06, 07 more often, depending on what kind of lock I came across. But lately, I’ve been working more with 08 foil. It turns out more stable. With foil 06, 07 it can open a little faster, but it does not hold for long. Therefore, for a more stable opening, it is better to use 08. We make the strip even thinner, like this, 3 mm, maximum 4 mm. We put it here and smooth it out very well. Better with your fingers, from all sides. And after that we transfer it to the working side of the tool. Now we do the tension. Mostly to the right. The instrument is thin, so you can’t use force; it won’t withstand force. Just do a slight pull to the right and swing up and down. Just a little bit. Easy. Work lightly so as not to break the tool. I've already prepared the foil. Ap4 S. Well, S or not S, it doesn't matter. The main thing is to shape the foil well so that it is even and maintains its height. Light tension, light rocking. I say again, there is no need to use force here! By the way, with Ap4 S you can use foil 07-06. Well, 08 will fit anywhere. It’s just that if you need to open it faster, you can try softer foil then. Basically it's a slight pull to the right and a gentle rocking up and down. If you do everything correctly, make the shape of the foil well, then these locks open almost 100%, that is, almost everything.
Text in the 3rd video: AP-3S, Cisa and AP-4. S or without S does not matter. AP-4 and AP-3. The tool is the same. We cut the foil 0.6. On the back side we make a shape and then transfer it to the working part. We try to smooth it well and insert it carefully so as not to wrinkle it when inserting it into the cylinder. You don’t need much force, just moderate pressure. Now let’s try AP-3. These are new locks, just arrived from Italy. We make a shape. Chisa AP-3, AP-4, ABUS XP-2, XP-20 and Bricard Dual XP. These are all the same tool. Everything will be on the video.
