All about product
Locksmith's tool for emergency opening of the lock Tesa TX80.
It is recommended to use sheet foil with a thickness from 0.05 to 0.08 mm.
Text in the 1st video: This is a TX80, two cylinders, two keys. This is an older version, this is a newer version. The cylinders are essentially identical, the only difference is that the new one has two pins on top, and the old one has three. We use foil 06. Cut a strip of approximately 3 mm, and be sure to give the foil a shape on the edge. We transfer it to the working part and we can begin. You can swing it up and down, this will open it faster, or you can just move it left and right. We do tension. Let's try another one. This is the old one with three pins. A more modern version with two pins. TX80. We make the shape in exactly the same way. Transfer to the working part.
Text in the 2nd Youtube video: Hello. This is Tesa TX80. The tool has been updated. Slightly different size, the tool is more dense. And now in the kit for this tool we put this handle. Because sometimes you have to swing for a long time so that your hands do not get tired and when jammed, it is hard to budge with a small handle. Foil in sheets, 05 and 06. Now we will try 05. We cut strips 3-4 mm wide. As usual, first lay on the edge to shape. It's important to make the shape well so that the foil holds its height. Transfer to the working part and carefully insert. If you work with a regular handle, you can swing up and down. In this position of the handle, it is not very convenient to swing up and down, and if you install it in the middle, then it will be more convenient. Well, for example like this. I think you should always start with foil 05. Although there is not much difference between 05 and 06. So, this is how it works. The price of the tool will be on the website, the link is under this video.
