Locksmiths tool for PRO 49 (Italy / Greece)

PRO 49 Lock Pick.

We recommend using 0.08 mm thick foil.

Text in the film: Hello! PRO-49. We're going to open the PRO-49 now. Again, the PRO-49 pins are white, while the PRO-49A pins are yellow. It is very quick and easy to distinguish them. 0.08 mm foil. Opening is almost 100%. The tool is also interactive. We use 0.08 mm foil. The tool is extended to make it easy to pump. Pump it up and down. It's much easier to do this when it's extended. 0.08 mm foil. We shape the back side. We also need to smooth the side so there are no protruding edges. Basically, we pull to the left and then up and down. And after it we can do like this. Pull to the left. And gently up and down. A long handle is included. Just in case. If the lock turns one way but is difficult to move the other, remove the short handle and install the long one. And with a sharp, sweeping motion, we rip it in the desired direction. But the standard one is almost always sufficient.