NEMEF ASSA ABLOY LockPick (Netherlands)

Text in the video: Hi! The TESSA TX-80 and this Nemef have a very similar key. The tool fits both the TESSA and this NEMEF. Working foil. We usually start with 0.06, and if that doesn't work, then either 0.07 or 0.08. You can use, say, 0.06, and if that doesn't work, then go straight to 0.08. But they all fit: 0.06, 0.07, 0.08. We usually start with 0.06. We make a shape, right here on the edge. You can use a ruler, or just your fingers, and move it to the working part. We mainly tighten it to the left and rock it up and down. Right and left are also possible. These are the locks here. There's an interactive pin, for example. Well, the NEMEF doesn't have this interactive pin. The TESSA does. If, for example, it's biting, then you can use a long handle. I'll show you now. TESSA TX80. The opening rate is very high. Well, I think 95%. If you play with the foil or apply a little force, you can open all 100%. So, let's start with 0.06 mm, because it's the fastest. Well, the softest, the fastest. If that doesn't work, then you can use 0.08 or 0.07. Pull the tension to the left and pump. It's a bit heavy. It's a bit difficult. To make it easier on your hands, you can install a long handle. The handle will be included. Both the standard and the long one. Firstly, it's easier to work with, and secondly, if it gets stuck, you can easily pull it loose with a sharp tug. It's not always necessary, but it should be handy. In most cases, this standard handle is sufficient. Newer locks, I think, will open more often with 0.06 foil. And the older ones, I think, will open more often with 0.08 mm foil, because they seem to have stiffer springs. The tension is to the left. Well, I think it's clear, so I won't make the video too long. There are five more locks here, I've already tested them all, and they all open. Some open with 0.08. Basically, here's the TX80 TESSA and ASSA ABLOY NEMEF tool. The price will be on the website. The set will include two handles.