WILKA 3600 (Poland / Germany) locksmith pick

WILKA 3600 Impression Lock Pick

It is recommended to use pre-cut foil, 0.05 mm thick.

Text in the film: Wilka 3600 model These are the keys. These locks open very well. You could say it opens 100%. The foil used is precut, 0.05 mm. No other foil is needed. It's only 0.05 mm. What else can I say about the tool? The profile is thin. It's easy to bend or break. So, work without force. We apply a slight tension, but don't use any great force. That's the only caveat. There are no other caveats. Everything is as usual on the back side. We make the shape and transfer it to the working part. The nose could be smoothed out further. Work both right and left, and up and down. Up and down, the tension will mostly be to the left. Again, swing without load. The profile itself is thin. So, if you apply too much force, you can break or bend it. So, work carefully. Oh, right, I forgot to mention. It doesn't open in 30 seconds. It might take a minute. Depends on the intensity. So, not always quickly. Wilka 3600