All about product
Text in the video: Hello. This is full impression kit. It includes a handle, a probe with markings, self-impression has markings for convenience and backlit optics. The tool is suitable for Israeli locks - Yale, Magnum, Rav Bariach, Alba, Peled. And also this tool is suitable for almost all Chinese profiles. For example, standard Imperial, standard Chinese profile. Optics and probe are designed to work with such cylinders as Integrator, Multilock 7+7, in order to find a white pin and push it. But I say right away that this will not be a 100% result. The same can be said for Yale, it also has a white pin and can be found using optics. Rav Bariach, Alba, Magnum, all the rest are Chinese cylinders. Well, all that have a standard profile, it all opens very well. By the way, about the probe with markings, it can be used as a tensioner. Moreover, it is very long, and ... I will now show approximately... it is possible for English profiles, it is possible for such cylinders with a horizontal keyhole. It is long and using it you can immediately squeeze the clutch. That is, when you move the drum, then immediately squeeze it. This is both a tensioner for work and a probe for working with Multilok and Yale. Regarding the foil, most often I use 06, but 05 is also possible. Let's see how it works. This is a seven pin standard Chinese cylinder. By the way, foil always works better when the marks line up with the holes. Therefore, when laying the foil, be guided by the number 5. That is, so that the marks on the foil coincide with the marks along the edges of the five. Don't match everything from one to seven. Just focus on the number 5. This is the optimal position for the foil. Everything, put, corrected. You can iron a little with a ruler. Here is another standard Chinese, this is Mortira. In general, the profile turned out to be so universal, both for Israeli and for Chinese profiles. But it is not for force opening, not for loads. It's for pure opening. This is Alba. Essentially a standard profile. Magnum. Try to lay down the foil in relation to the marks of the number 5. Like this now. Then the divisions coincide as much as possible. You can wiggle up and down, just be careful. Rav Bariach, with a standard profile. Such a key. This is the standard profile. They also come with another profile, but this is the usual one. Well, I think I've shown enough. Of course, the impression does not give 100 percent, but it opens a lot. As for Yale, Integrator, 7+7 Multilock, everything is more difficult with them, you need to look inside, find a white pin and immediately push it on the impression. But even with this, there will not be a 100% result. So, this is the kit. Optics, probe and tensioner in one, and impression. The price of the kit will be on the site, the link is under this video.
