All about product
The kit includes
- Technomax 4x4 Decoder
- Reset tool
- Spare pins
- Tension handles
- Universal Card Reader
Automatic Lucky Decoder can open and decode Technomax 4×4 double bit level lock.
Since this Lucky decoder has a design meant for the double bit lever lock Technomax 4×4 its structure is build accordingly. The pick consists of blade with two cassettes. Inside the cassette we have separate pins (4 in this case). The cassettes are connected through a pumper to the back wheel.
As you can see in the picture above, the structure of the blade resembles exactly the “patented” key of the safe, so there is no need to forcefully remove the “bulges” that sit inside both at the front and at the back plates. The tool offers clean opening
The mechanism is build like this – when you start the pumping (the movement on the back wheel) you move the pumper inside. And this effects the movement of the cassette. On the other hand the pins are pressed on the levers. This way they move according the code of the lock. And it happens until it “assumes” the position corresponding to that of the “teeth” of the original key.
This lockpick tool works in a non- disruptive way. Every tool can be used on a specific lock! in this case Technomax safe locks or on locks with similar dimensions. The dimension of the insides of the locks (the size of the original key) is crucial. Meaning – the count of the levers and the distance between the levers is a must to know before using any lockpick tool. Lucky decoders makes no difference.
⚠️ Important! ⚠️
The blade is not designed for forceful operation. Apply only minimal tension to allow the pins to move freely. Excessive tension can damage the mechanism and may result in blade breakage.
