All about product
Text in the 1st video: Hello. These are pullers. This is new one. These are the ones that have been already available. This one is light, small, very compact, the functionality is the same. Now I will show you how it works. Although I think everyone already knows how pullers work. Here is a Chinese lock, a crescent key. We have there are different self-tapping screws, ours, reinforced. If the lock is a crescent, then we pull it with an average self-tapping screw. Thin ones will slip a lot. If such a cylinder is Chinese, then a thin self-tapping screw just fits it. But it is - if it`s Chinese. If the lock is good, then you need to pull with a stronger self-tapping screw. In this case, you will first have to screw in the Metric, spiral tap, and then the self-tapping screw, since it is very difficult to drive such a self-tapping screw right away. Well, crescents are always an average self-tapping screw. WD, lubricant can be used, it will be easier with it, but this is not necessary, in principle it twists easily anyway. We cling to the self-tapping screw in this way. We rest and pull by finger to the stop. And we take the key and twist. Well, I have not dragged him a little. But just clearly it will be seen what is happening with the lock. Here you can already drag it by hand. But no, it’s hard with your hands, you have to pull it a little. In general, both cylinders and car ignition locks are pulled out in the same way. In general, the puller is universal. I have not dragged the lock a little, but I think that the meaning is clear. The price of pullers, screws and a tap will be on the site. Link and phone number under this video.
Text in the 2nd video. This is an overview of our mini puller, so to speak, a lightweight version of the puller. Its functionality is exactly the same, nothing worse than such or such a puller. Well, what is the difference, the emphasis here is good, you can push back well if there is such a need. And here the difference is that there is a handle. And the stroke length is about the same as this one. This black one weighs half as much. That is, you can just throw this one in your pocket. Well, what else, all these pullers are universal. Now I will not show you how they work. I think you already know. Self-tapping screws are screwed in. You can also buy reinforced self-tapping screws from us. There is also a metric and handles for it. What is it for? For example, there is a powerful good lock and you need to screw in a self-tapping screw, this is such an average self-tapping screw, it is stronger. You can't just screw it in because it's thick. Therefore, if you need to screw in such a self-tapping screw, we take the metric, start with it, since it is much easier for them to do this. We unscrew the metric and after that we screw in the self-tapping screw and then pull the lock. The price for all these tools is on the website.
Text in the 3rd video. It is Gerda lock. It is difficult to open by hands. So we will show how to make it with our lock puller and Metric spiral + Handle. Take Metric spiral with handle and apply it to the center, approximately. By the way, our metric is made of hardened material, so it cannot be bent, it will just burst. There is a ratchet also here we have. It is not necessary very deeply, but at least by 1 inch (it is 2-2,5 cm). If it is already going tight, then it is better not to twist, you can break off. Well, here, in principle, it goes. Now unscrew, unscrew back. And now you can screw into the self-tapping screw. We screw the self-tapping screw to the stop, about 1 inch ( 2,5-3 cm), well, how it will go, because the head can also be twisted off. That's it, now we take the puller, hook it. Hooked. Focus. Stand up. Pulled up, pulled up all the way. And now we take the key and start twisting. You can also twist by swinging. Like this. Jumped off. You need to raise a little higher, not in the center. So. we see it stretching out, together with a leash. The leash has broken off, so further you will have to stick in some kind of screwdriver, maybe thinner, and scroll.
