All about product
TURBO DECODER TOY80 HAS NO READING GRAPH.IT IS USED FOR EMERGENCY OPENINGS ONLY.
This is the original Turbo decoder TOY80 patented tool invented and produced by Luckylocks in Bulgaria! The automatic self-impressioning decoder TurboDecoder TOY80 is designed specifically to open and decode door locks for Renault vehicles.This tool is perfectly suited for TOY80 lock profile, allowing for efficient and non-destructive entry.
Compatibility Notice
*The list of the tools is incomplete
Here is the incomplete list of the models the tool opens:
TOYOTA:
Toyota Camry (2007–present)
Toyota Corolla (2008–present)
Toyota Prius (2004–present, especially Gen 2 and 3)
Toyota RAV4 (2006–present)
Toyota Highlander (2008–present)
Toyota Yaris (2012–present, depending on market)
Toyota Avalon (2005–present)
Toyota Tacoma (2010–present)
Toyota Sienna (2011–present)
Toyota 4Runner (2010–present)
LEXUS:
Lexus ES Series (2007–present)
Lexus IS Series (2006–2016)
Lexus RX Series (2007–present)
Lexus GS Series (2006–2018)
Lexus CT200h (2011–2017)
Lexus NX/UX (select models)
SCION:
Scion tC (2005–2016; mostly later models)
Scion xB (2008–2015)
Scion xD (2008–2014)
The kit includes: Turbodecoder TOY80, 2 Reset tools, Code reading card, Plastic Transportation Box
Precision Design and Features
The TurboDecoder TOY80 is meticulously crafted to match the TOY80 lock profile. It includes a decoding blade with 8 pins—4 on one side and 4 on the other. Additionally, it incorporates three essential wheels:
- Tension Wheel – Ensures controlled movement.
- Gate Wheel – Supports the decoding mechanism.
- Turbo Wheel – Enhances speed and accuracy.
These components work together to provide precise and dependable lock decoding.
Important Usage Note
Always check the vehicle’s lock model and generation before selecting a tool. Using the correct decoder ensures optimal performance and prevents errors.
How does it work?
To use the TurboDecoder TOY80, insert the tool into the TOY80 lock, ensuring proper alignment with the lock cylinder. The tool is designed to engage with the lock pins, allowing you to decode the lock without causing damage. Once inserted, apply consistent tension using the Tension Wheel to maintain a smooth operation. This will help keep the lock mechanism in place while the tool works to decode the pins.
Tension wheel – with this wheel you apply tension on the tool during the opening procedure. The Tension wheel must be in constant tension while you operate with the Turbo wheel (read below)
The Gate Wheel plays a crucial role in aligning and decoding the lock’s pin configuration. Slide back the wheel to allow full engagement of the tools’ pins with the wafers of the TOY80 lock. If the Gate is not fully opened (pushed back) the pins of the tool cannot engage with the locks’ wafers.
The Turbo Wheel assists in the self-impressioning process, completing the decoding once the pins are aligned by the Gate Wheel. Turn the Turbo Wheel in small increments to fully engage the lock’s mechanism and ensure precise results.
Efficiency improvement
Proper lubrication of the lock mechanism can improve the TurboDecoder TOY80’s efficiency. Use a small amount of WD40 or any other lock lubricant or graphite powder to prevent the pins from sticking or jamming during the decoding process.
Lock orientation – it can be left or right. Just insert the tool. Once the Turbo Decoder touches the bottom of the lock, push it by pressing the Turbo wheel forward. If you see the tool going deeper – click it back and extract. Reverse it and insert again. If the orientation is correct when you press the turbo wheel forward, nothing will move. Wrong orientated Turbo Decoder won’t open the lock, its turbo wheel will turn easily.
It’s important to avoid excessive use of the TurboDecoder TOY80 on the same lock without checking the lock for wear. By following these steps, you’ll achieve accurate and reliable decoding, ensuring the TurboDecoder TOY80 works effectively for unlocking and without damage.
