All about product
Set of four impressions for Securemme K5 cylinders (Italy).
It is recommended to use pre-cut foil with a thickness of 0.05 mm.
Text in the video:
A set of four tools for each type of wave. Each tool has a marking that matches the marking on the key. This marking means the type of wave. If you approach the door, of course, it will be unclear what wave is in the installed lock, so in the case when you do not know what type of wave, then in order, try each until one fits. AG wave, accordingly, we take the same instrument. The foil can be placed immediately on the working part, but so that it is higher than the tool, because the secrets rise above the key. Very carefully, so as not to wrinkle, bend up the nose, smooth, and also remove this from the edges. So the foil must to be higher than the tool. You can work right-left and up-down. You can work right-left and up-down. It is better to combine right-left, up-down. The tool is very thick, so it is very strong, here you can safely give a good load. Wave type CG, accordingly, we take a tool with the same marking. The foil is mostly 0.5 regular, well, you can try 0.6, but, mostly it is 0.5. Very carefully, do not press, the edge needs to hold, remain high with the foil, so that the foil is higher than the key, the edge. We make tension to the left and swing up and down. Well, and, accordingly, the same thing further, so as not to waste time now, not to show the same thing. Marking AK, BE and so on. That is, for each key its own tool. In case the wave is unknown, try one by one. If we make assumptions about which type is more common, then I think it is AK, here it is, very common. Therefore, it is better to start with it. You can buy both as a set and separately. The price will be on the website, phone numbers, links, everything will be on the video.
