LuckyDecoder for Double Bit Lock Model Cisa 3-5-3
This LuckyDECODER CAN OPEN LOCKS OF THE FOLLOWING TYPES:
"Cisa" Cambio Facile 3-5-3
Lockpicking Cisa 3+5+3 - Kale lock - Garda lock picking - Come aprire Cisa 3+5+3 Crocheter une serrure
Lucky TURBODECODER for lever tumbler locks Cisa 3-5-3 & GARDA/KALE
Cisa 3-5-3 regular model
3-5-3 Cambio Facile CISA Models
model 3-5-3 V1 Anti-pick
Model V2 Cisa 3-5-3 Anti-pick
Please watch carefully the video instruction of Luckydecoder TD 5 for Cisa 3-5-3 !!!
This is essential for the correct operation of the instrument!
Text in the 1st video: This is the so-called large Cisa, that is, the Cisa 3 5 3, with a turbodecoder for it. I recently filmed a video about opening a Cisa with Magic Keys. And now, for comparison, to understand the difference and how much faster it can open a Cisa, I'll show you how it opens with a turbodecoder. But I'd like to point out right away that the pins need to be properly adjusted! Well, they're usually properly adjusted. Well, that is, they shouldn't be too hard. Because if they're too hard, it will take a long time to open. They need to be softer. So. It's the same with the Magic Key, the impression tool, as in the video I filmed yesterday. I think everyone remembers. The first press, the first pull, is done very lightly and very carefully. Until one or two tumblers, which have a limited lift, give way. Otherwise, if you immediately apply a good amount of tension and turn it hard, one of the pins will break or bend. Therefore, just like with the Impression, apply a very light initial tension. And we turn the wheel very gradually. Oh, there it is, it's sagged. Look. There it is. We remember this one. And for the remaining turns, you'll need to immediately use your finger or something to lower it a little bit. Because, then, this tumbler, it doesn't rise very high. That's it, it's sagged. You can feel it right away. That is, it's turned a little further. And now we can work normally. For comparison, just look at how much faster it opens compared to the Magic Key Impression. One turn. Very quickly. Of course, the time will vary from lock to lock. A little faster, a little slower. But overall, compared to the Magic Key Impression, it's simply instantaneous. Now we make another turn. And I immediately lower this pin about a millimeter and a half. One turn. If it doesn't go, you have to wiggle this wheel. Well, it lifts it up and down. Overall, great job. The speed is excellent.
Text in the 3rd video. TurboDecoder for Big Cisa 3 5 3. Cisa, Kale, Garda are all the same. Also, if I'm not mistaken, there is Stavr, with the same size. When working with Cisa, this is very important, when we insert an impression, not only a turbo decoder, but also an ordinary impressioning magic key, do the first tension very carefully and little by little, because if you press right away, the pins will bend. And when the first pins have already lowered, you can work at full strength. It is very important! Kale lock is also the same as Cisa. The price for the turbo decoder is on our website, link and phone number are under this video.