All about product
Turbo decoder for easy opening locks such as Securemme / Cisa / Kale / MOTTURA / Mul-T-Lock / FUARO / BARRERA / 4 + 4 - Grimaldelli
Text in the 2nd video:
This is Securemme. 4+4. 8 levers. Narrowed key. It has concave housing. Guide. Therefore, before using this tool, you need to use such a cutter, it is included in the kit. In this lock I have already cut it off. But I'll show you now.
It cuts off simply. There is no limiter here. That is, it walks back and forth, and it's easy to get to the center. You get to the center and slowly, by rocking, like this, up, back, forward, in different directions.
You make a full turn with the cutter and that's it. After that, the key continues to work as before, that is, the fact that you cut off the guide does not affect the operation of the key. This tool is suitable not only for Securemme lock, but for almost all 4 + 4 that have such a black overlay. A lot of them.
There is Cisa, Turkish lock Kale, Mul-t-lock, Chinese lock Barrera, Fuaro, etc. The most difficult of them I think is this Securemme. Because in addition to the guide that needs to be cut off, all 8 levers here have anti-picking and false grooves.
Therefore, the tool, the pins are a little hard, they are new and a little hard, and before selling the tool we loosen them a little so that they go easier. When they walk easier, it is easier for them to pass false grooves, anti-picking.
As soon as we start working, we twist a little, then we start harder. It can be said how it allows you to twist, so do. Little by little the first time. If it gets into anti-picking, then we do a full reset and start again.
Here the manipulator is not allowed now. This means that you need to play with the manipulator a little, raise it a little.
Key is mirror, 4 turns. If the first turn was hard and long to do, then there is an option, I will now show you which one.
Here, we have made the first turn. Let assume that we made it on this. We unscrew this hexagon. After that, we make a full turn to the end to the left. And we can pull out the cassettes. The cassettes are pulled out. Change their places. And now we change position. That is, we insert it down.
Now, by moving the manipulator to the right, they enter.
And so we insert it into the lock and make the next turn. And if you need the next turn, then we do the same thing again - we change places and already insert it as it should be. That is, with such manipulations, you can do all the other turns, if necessary, if the first turn was hard to do. Well, or according to the old scheme, we just take photographs and collect all the other rotations according to the drawing. I just showed the possibilities of this tool.
The lock is really hard. Without the presence of such a turbo decoder, there will be problems with it, as there is anti-picking.
The kit includes a cutter, spare pins, two pushers. Kale pushes a little lower. Securemme pushes a little further.
The price of this tool is on our website.
