All about product
Self-impressioning type tool for European Ezcurra DS15 (widespread in Europe).
The kit includes the foil which is recommended for use. The thickness of the foil for your choice - 0.4mm, 0.5 mm or 0.06 mm.
Text in the video: Hello. Here we have two Ezcurra, exactly the same in appearance, but they are different. One of them is five-pin, the second is six-pin. Both are double-row. They look exactly the same. How can you distinguish? You can insert the tool and swing it, then pull it out and look at the print where the pins are printed. If they appeared correctly, then this is it. If they appear between the holes, then you guessed it wrong. I use foil 05. I think that for Ezcurra cylinders you still need to use 05. But you can also try another one. Because even with foil 05, some pins are pressed very slowly. Cut off such a strip. First you need to put it on the back of the tool and smooth all these notches, you can use your fingers or this ruler. In general, first we shape the foil, and then we shift it to the working side of the tool. Carefully remove and lay down on the working part. Smooth out a bit where there are imperfections. And now you can insert it. I recommend using 05 foil for these cylinders, and if you can't open it, then try another thickness. The price of the tools for 5 and 6 pin Ezcurra will be on the site, the link is under this video.
